
Many shops will be will more willing to replace a single defective scale on an existing DRO vs. replacing the entire system, if that will get them up and running. Newall's DSG and DMG ...
IMAC Tecnologie is an established Italian engineering company, and for over twenty years has been working in the field of machine tools. The production site is located in Muggio near Milan.IMAC m...
SHG-A4 Linear Encoder
RS485 meets the requirement of a multi-point communication network, which can have up to 32 drivers and 32 receivers on a single two-wire bus. A key feature is the ability to address individual devices. This model can be ordered with unique address tags. Developed to meet a wide range of feedback applications, the SHG-A4 absolute linear encoder provides a true absolute position immediately upon power-up. The encoder does not use batteries or static memory to retain the positional data. True position can be reacquired once power is applied, regardless of duration or power-off movements.
Click here to learn more about Newall's Inductive Encoder Technology
Download SHG-A4 Linear Encoder Documents: SHG-A4 Protocol (pdf)SHG-A_ Installation Manual (pdf)
Dimensional Drawing (<100" travel) (pdf)
Dimensional Drawing (≥100" travel) (pdf)
Newall Linear Encoder Catalog (Newall Linear Encoder Catalog)
Specifications
|
---|
Output Signal | RS485 |
---|---|
Accuracy/Meter
|
±0.0004", ±0.0002", ±0.0001"(±10µm, ±5µm, ±3µm)
|
Resolutions
|
10µm, 5µm, 1µm or 0.5µm
|
Scale Travels
|
4" to 137.8" (102mm to 3.5m)
|
Scale Diameter
|
0.601" (15.25mm)
|
Reader Head Dimensions
|
2.05"H x 5.16"L x 1.10"D (52mm x 131mm x 28mm)
|
Reference Marker
|
n/a
|
Maximum Traverse Rate
|
n/a
|
Power Supply
|
5VDC ±5%, <350mA
|
Shock (11ms)
|
100g (IEC 69-2-6)
|
Vibration (55-2000Hz)
|
30g (IEC 68-2-27)
|
Sample Period
|
50µs
|
Environmental Rating
|
IP67, fully submersible (IEC 529) - Exceeds NEMA 6
|
Operating Temperature
|
32° to 131°F (0° to 55°C)
|
Coefficient of Expansion
|
12 x 10-6K
|
Scale Material
|
316 stainless steel
|
Overall Scale Length
|
Scale travel length + 10.2" (258mm)
|
Standard Cable
|
15 core, 11.5' (3.5m) armored
|
Maximum Cable Length
|
65.6' (20m)
|
Standard Connector
|
15 pin "D" type
|
EMC Compliance
|
BS EN 61000-6-2 and BS EN 61000-6-4
|
Options
|
---|
Resolutions
|
Custom resolutions available
|
---|---|
Non-Armored Cable
|
PUR (polyurethane)
|
Connectors
|
• IP67 (NEMA 6)
• None (flying lead) |
Cable Lengths
|
22' (7m) or 19.68" (0.5m)
|
Quick and Easy Installation
The design of these linear encoders allow installment in almost any position, unlike glass-scale linear encoders, which usually need to be installed with the lip seal facing downwards to prevent contamination. Self-aligning fixing brackets allow virtually effortless scale mounting, needing only a single hole for each set of brackets