Replace Broken Glass Scales with DSG/DMG

Replace Broken Glass Scales with DSG/DMG

Many shops will be will more willing to replace a single defective scale on an existing DRO vs. replacing the entire system, if that will get them up and running. Newall's DSG and DMG ...

Newall Transitions to ISO 9001:2015 – Quality Management Systems

Newall Transitions to ISO 9001:2015 – Quality Management Systems

Newall Measurement Systems is pleased to announce the achievement of the ISO 9001:2015 Quality Management Systems Standard Certification. The transition to the new ISO 9001:2015 standard this June co...

Newall Helps Improve Performance MJC Engineering

Newall Helps Improve Performance MJC Engineering

MJC Engineering and Technology, Inc., Huntington Beach, CA, is a world leading builder of CNC spin forming machines, typically used for tube spinning and steel and aluminum pressure vessel productio...

Incremental Feedback Encoders for CNC/PLC: MHG-VP Linear Encoder

MHG-VP Linear Encoder

MHG-VP Incremental Linear EncoderThe MHG-VP linear encoder is intended for use in conjunction with Newall's SCC-200 module. The SCC-200 will output a ~1Vpp sine/cosine signal making it ideally suited for CNC and other control feedback.

Click here to learn more about Newall's Inductive Encoder Technology

Download MHG-VP Linear Encoder Documents: SCC-200 Data Sheet (pdf)
MHG Dimensional Drawing (pdf)
Installation Manual (pdf)
Newall Linear Encoder Catalog (Newall Linear Encoder Catalog)


Output Signal
~1Vpp, sine/cosine from SCC-200 converter
±0.0002" (±5µm)
20µm signal period
Scale Travels
2" to 40" (51mm to 1,016mm)
Scale Diameter
0.226" (5.75mm)
Reader Head Dimensions
1.38"H x 2.95"L x 0.98"D (35mm x 75mm x 24mm)
Reference Marker
Every 0.19" (5mm)
Power Supply
5VDC ±5%, <300mA (with SCC-200)
Shock (11ms)
100g (IEC 69-2-6)
Vibration (55-2000Hz)
30g (IEC 68-2-27)
Sample Period
Environmental Rating
IP67, fully submersible (IEC 529) - Exceeds NEMA 6
Operating Temperature
32° to 131°F (0° to 55°C)
Coefficient of Expansion
12 x 10-6K
Scale Material
Carbon fiber
Overall Scale Length
Scale travel length + 7.4" (187mm)
Standard Cable
9 core, 11.5' (3.5m) armored
Maximum Cable Length
72.2' (22m)
Standard Connector
9 pin "D" type
EMC Compliance
BS EN 50081-2 and BS EN 61000-6-2


Custom resolutions available
Non-Armored Cable
PUR (polyurethane)
• IP67 (NEMA 6)
• None (flying lead)
Cable Lengths
22' (7m) or 19.68" (0.5m)

Quick and Easy Installation
The design of these linear encoders allow installment in almost any position, unlike glass-scale linear encoders, which usually need to be installed with the lip seal facing downwards to prevent contamination. Self-aligning fixing brackets allow virtually effortless scale mounting, needing only a single hole for each set of brackets.

Search Newall
Search For: 

Exact Matches Only